pylabrobot.paa.kx2.KX2Gripper#
- class pylabrobot.paa.kx2.KX2Gripper(driver: KX2)#
Bases:
objectThe physical servo gripper, reached as
kx2.gripper.Attributes
Calibrated jaw travel in millimeters.
Methods
__init__(driver)Use the owning arm's transport, calibration, and motion lock.
check_plate_gripped([num_attempts])Require measured contact, independently of reaching the requested width.
home()Calibrate the jaws against the hard stop and encoder index.
move_to_jaw_position(width[, force_sensing, ...])Move the jaws in mm, retaining the closing target and current limit while gripping.
Read the jaw width in millimeters.
Whether the measured jaws are within 0.1 mm of their calibrated closed limit.
Require plate detection, stationary current, and jaws away from both travel limits.
- Parameters:
driver (KX2)