pylabrobot.formulatrix.mantis.MantisCarousel#

class pylabrobot.formulatrix.mantis.MantisCarousel(*, configuration: CarouselConfiguration, io: FTDI | None = None, ftdi_library: str | None = None)#

Bases: object

Home and position an LC3 carousel independently of the Mantis arm.

Setup opens the LC3 link without moving. Home before selecting an angle or a one-based chip slot. Keep the Mantis head clear of the carousel; this class does not coordinate arm movement.

Methods

__init__(*, configuration[, io, ftdi_library])

Use this unit's carousel calibration and interface B of its USB product LC3.

home(*[, timeout])

Establish the carousel's flag reference; do nothing if already homed without faults.

move_to(position, *[, speed, acceleration, ...])

Rotate to an absolute angle in degrees by the nearest permitted route.

move_to_slot(slot, *[, speed, acceleration])

Select a one-based chip slot using this carousel's calibrated slot-one angle.

request_position()

The controller's position in degrees, normalized to [0, 360); requires homing.

request_status()

The motor status word: bit 0 moving, bit 1 homing, bit 2 homed; higher bits are faults.

setup()

Open only this LC3's command link and read firmware and limits, without motion.

stop()

Stop any motion and close the link, leaving the carousel at its current angle.

Parameters: