pylabrobot.formulatrix.mantis.driver.simulator.MantisSimulationArm.move_to_xy_position#
- async MantisSimulationArm.move_to_xy_position(*, x: float, y: float, minimum_traverse_height_start: float | None = None, speed: float | None = None, acceleration: float | None = None) None#
Move the nozzle across to (x, y) in the deck frame, guarded: Z rises first to the traverse height if it is below it, then the arms move with Z held. Nothing avoids the chip racks.
Over the plate holder the unit’s stage transform places it; elsewhere the arm frame fitted to it. From an approach path the head first leaves along it.
- Parameters:
x (float) – right of the deck’s front-left corner, mm.
y (float) – behind the deck’s front-left corner, mm.
minimum_traverse_height_start (float | None) – the nozzle’s height above the deck to rise to first, mm;
default_minimum_traverse_heightwhen None.speed (float | None) – the nozzle’s, mm/s; None takes
default_xy_speed.acceleration (float | None) – the nozzle’s, mm/s²; None takes
default_xy_acceleration.
- Raises:
MantisConfigurationError – without the unit’s
armorstageblock; nothing is sent.MantisMotionError – if the arm is not brought up, a motor faults, or Z does not read at the traverse height after rising to it.
MantisKinematicsError – if (x, y) is out of the arm’s reach.
ValueError – if a target is outside its motor’s limits, or a speed or acceleration out of range.
- Return type:
None