pylabrobot.formulatrix.mantis.driver.simulator.MantisSimulationArm.park#

async MantisSimulationArm.park(*, minimum_traverse_height_start: float | None = None, with_model_updates: bool = False) → None#

Move the head to idle along its zone’s route, from any zone; from an approach path, first out along it.

The head first rises to the traverse height if it is below it. Without the unit’s zones it is parked from near idle only.

Parameters:
  • minimum_traverse_height_start (float | None) – the nozzle’s height above the deck to rise to first, mm; default_minimum_traverse_height when None.

  • with_model_updates (bool) – play each segment on its own and pass the pose on after it, so the 3D model and the simulator follow the whole path; on a device up to 36% slower (design.md).

Raises:
  • MantisConfigurationError – for a height in the deck frame without the unit’s stage block; nothing is sent.

  • MantisMotionError – if the arm is not brought up, a motor faults, Z does not read at the traverse height after rising, or without the unit’s zones the head is not near idle.

  • NotImplementedError – on a v3, until a v3 has run it; nothing is sent.

  • ValueError – if the traverse height is outside Z’s limits; nothing moves.

Return type:

None