pylabrobot.heating_shaking.inheco.InhecoThermoShake

class pylabrobot.heating_shaking.inheco.InhecoThermoShake(vid=1003, pid=8227, serial_number=None)

Bases: HeaterShakerBackend

Backend for Inheco Thermoshake devices

https://www.inheco.com/thermoshake-ac.html

Methods

__init__([vid, pid, serial_number])
activate_touchscreen()	De/activate the touchscreen
deactivate()	Deactivate the temperature controller.
deactivate_touchscreen()	De/activate the touchscreen
get_current_temperature()	Get the current temperature of the temperature controller in Celsius
get_device_info(info_type)	Get device information
reset_action_display()
send_command(command[, timeout])	Send a command to the device and return the response
set_shaker_shape(shape)	Set the shape of the figure that should be shaked.
set_shaker_speed(speed)	Set the shaker speed on the device, but do not start shaking yet.
set_target_temperature(temperature)
set_temperature(temperature)	Set the temperature of the temperature controller in Celsius.
setup()
shake(speed[, shape])	Shake the shaker at the given speed
start_shaking()	Start shaking the device at the speed set by set_shaker_speed
start_temperature_control()	Start the temperature control
stop()
stop_shaking()	Stop shaking the device
stop_temperature_control()	Stop the temperature control